Configuring postback for AD1

To set up a postback with Offerrum (Ad1), follow these steps:

1. Select an offer from the catalog.

2. Click on the "Create Flow" button.

3. In the flow configuration, choose the flow type as "Direct link."

4. In the additional settings, enter the postback link.

Select the GET method. Postback link: https://kdtrk.net/ru/postback/?data={subid}&partner=ad1&status={status}&cost={summ_approved}

Enter the postback link in the field.

5. Select the goals for which the postback will transmit conversions, depending on the offer.

6. Check all statuses.

7. Click the "Create Flow" button.

8. Copy the link.

Add the parameter {click_id} to the end of the link. Example of the complete link: http://clicktvf.com/XXXX/{click_id}

IMPORTANT: If you wish to specify other macros in the advertised link, then specify the {click_id} macros first. For example, a link with the macros {site_id}, {ad_id},

must be added with a colon (:) will look like this:

Link with the default domain: http://clicktvf.com/XXXX/{click_id}:{site_id}:{ad_id}
Link with a parked domain: http://park.primerdomena.com/{click_id}:{site_id}:{ad_id}

9. Paste the obtained link with the {click_id} parameter into the URL field in the advertising campaign within the Kadam dashboard.

10. In the campaign parameters, in the "Integration template" field, select the template for the current affiliate program.

After all the settings, it is definitely recommended that before launching the campaign, do a test conversion strictly according to instructions